Clarion APX201.2 - Manual (Page 8)

2 Channel Power System Amplifier
8
Mixed-Mode Satellite and Subwoofer System
FREQ (hz)
80
100
125
150
200
L (mH)
8.0
6.4
5.1
4.2
3.2
C (uF)
497
398
Set X-Over Mode to OFF
NOTE: Chart values based on 4 ohm speakers.
Figure 5 - The amplifier can be configured for a mixed-mode operation. The
table provides component values to create a 6dB per octave crossover at
specified frequencies. Use components that have a + 5% tolerance and
capacitors rated at 100V. NOTE: Choose the same frequency for both LP
and HP crossovers. Do not overlap frequencies, as this may damage the
amplifier.
apx201.qxd 12/5/01 12:57 PM Page 8