ClearSounds CSC50 - Manual (Page 24)

24
If you answer a call before information appears on the screen, it will not be stored in the
call history. Between the first and second rings the screen displays:
• Your caller’s name (15 letters are sent by your phone company).
• The caller’s area code and telephone number (area code is not display if it is pro-
grammed as the Home Area Code).
• The time and date of the call.
• The call’s position in call history.
NOTE: Call information is displayed for about 30 seconds.
Review Call History
To review earlier calls
In the hook position,
1. Using the or arrow buttons to scroll through the caller list.
2. To advance through call history from an earlier call, press the DOWN arrow
button. When you have reach the end of the call history, the screen displays <<END
OF LIST>>.
New Calls / Message Waiting Indicator Light
In the on position, this red light
(See figure #36) will remain lit unless you do one of the
following in the hook position:
1. If you do not have Caller ID or Message Waiting Service, your CSC50 will alert you
that you have missed a call by causing the red indicator light to flash. To turn OFF,
simply tap the
down arrow button once or until the light turns off.
2. If you only have Caller ID Service, your CSC50 will continue to flash unless you
review all new calls. To turn OFF, simply continue to tap the down arrow button
to scroll through the Caller ID until the light turns off.
3. If you have Message Waiting Service through your local telephone company, your
CSC50 will alert you that you have a message waiting after you have reviewed your
Caller ID or missed calls. To turn OFF, you will need to retrieve your message(s)
before the red light will go off.
NOTE: The red flashing light will return with your next missed call, next call with Caller ID
information or if you receive a message through Message Waiting Service.
Figure #36 - New Call/ Message Waiting Indicator