CAT Hydraulic Excavator 325DL - Manual (Page 29)

29 325D L Hydraulic Excavator specifications
Optional Equipment
Optional equipment may vary. Consult your Caterpillar ® dealer for details.
Engine/Power Train
High Ambient Cooling
For conditions up to 52° C (125° F)
Prefilter, Air
Starting, Cold Weather Package
Two additional maintenance free batteries
High capacity starter motor
Heavy-duty cable
Jump-start receptacle
Ether aid
Block heater
Undercarriage
Track Shoes
600 mm (24") double grouser
700 mm (28") double grouser
800 mm (32") heavy-duty triple grouser
Heavy-duty rollers
Auxiliary Hydraulics
Hammer Circuit
For single function (1 way/2 pump) hydraulic tools
Thumb Circuit
For double function (2 way/1 pump) hydraulic tools
Tool Control System
For single or double function, (1 or 2 way, (1 or 2 pump)
hydraulic tools
Joysticks with additional switches
Program up to 10 tools in memory
Capability of adding medium pressure
Medium Pressure Circuit for tools requiring
medium pressure
Hydraulic Pin Grabber Quick Coupler and controller
Lines for Booms and Sticks
Work Tools
Wide Offering of Buckets, Tips and sidecutters
Front Linkage
Booms
Reach 5.9 m (19 ft 4 in)
Mass 5.3 m (17 ft 5 in)
Super Long Reach 10.2 m (33 ft 6 in)
Sticks
Reach 3.6 m (11 ft 10 in)
Reach 2.95 m (9 ft 8 in)
Reach 2.5 m (8 ft 2 in)
Mass 2.5 m (8 ft 2 in)
Super Long Reach 7.85 m (25 ft 9 in)
Bucket Linkage
B1 Family
CB1 Family
DB Family
Boom Lowering Control Device
Electrical
Product Link (PL121SR/PL321SR)
Machine Security System (MSS)
Power Supply (12V-10 Amp)
Guarding
Falling Object Guarding System (FOGS)
Full length, wire mesh
Heavy-Duty Bottom Guards
Rubber Bumpers (side)
Track Guiding Guards
Sprocket End, Idler end guard
Two-piece full length (center guard removed)
Vandalism Guards
Operator Environment
Hand Control Pattern Changer (ISO-SAE)
Rear window, secondary exit
Sun screen – roller type
Seat, high back with air suspension and heater
Third pedal, straight travel