Cobalt Networks 9341 - Manual (Page 15)

9341 User Manual •••• (V 1.0) Page 15 of 22
Information Submenu
Menu Structure Parameter Type
Info +POW Positive Watts Consumed
-POW Negative Watts Consumed
SWR# Software Release Number
SWB# Software Build Number
Positive Watts Consumed
A read only indication of power consumed by the card from the frames +12V rail.
Negative Watts Consumed
A read only indication of power consumed by the card from the frames +-7.5V rail.
Software Release Number
A read only indication of the software release number. A higher number is newer release of software.
Software Build Number
A read only indication of the software build number. Software build number is an internal indicator
used by Cobalt engineers to differentiate different software builds.
Factory Default Settings
The factory default settings are as follows
1) The audio mapping is for each Analog input to be routed to its respective AES output, for example
ANALOG IN 1 to AES OUT 1.
2) Audio gain is set to 0dB and polarity is set to normal on all channels.