GoPro HERO - Manual (Page 19)

36 37
/ Battery
BATTERY STORAGE AND HANDLING
The camera contains sensitive components, including the battery.
Avoid exposing your camera to very cold or very hot temperatures.
Low or high temperature conditions may temporarily shorten the
battery life or cause the camera to temporarily stop working properly.
Avoid dramatic changes in temperature or humidity when using the
camera, as condensation may form on or within the camera.
The integrated camera housing protects the camera and battery from
water damage. For more information, see
Camera Housing (page
39). Do not turn on your camera if the camera (inside the housing)
gets wet. If your camera is already on, turn it off immediately. Allow
the camera to dry thoroughly before using it again. Do not dry the
camera or battery with an external heat source such as a microwave
oven or hair dryer. Damage to the camera or battery caused by contact
with liquid (inside the housing) is not covered under the warranty.
WARNING: Do not drop, disassemble, open, crush, bend, deform,
puncture, shred, microwave, incinerate, or paint the camera.
Do not insert foreign objects into any opening on the camera,
such as the mini-USB port. Do not use the camera if it has been
damaged—for example, if cracked, punctured, or harmed by
water. Disassembling or puncturing the integrated battery can
cause an explosion or fire.
/ Important Messages
MICROSD CARD MESSAGES
NO SD
No card present. The camera requires a
microSD, microSDHC or microSDXC card to
capture videos and photos.
FORMAT SD?
Card is not formatted or is improperly
formatted. Select Yes to format the card,
or select No and insert a different card.
NOTICE: If you select Yes, all of the content
on the card is deleted.
FULL Card is full. Delete files or swap card.
SD ERR
Camera is unable to read card formatting.
Reformat the card in the camera.
PRO TIP: Reformat your microSD card on a regular basis to ensure
that the card can continue to receive information from the camera.