Hyundai H-SA754 User Manual
Page 6
6
SPEAKER CONNECTIONS
This amplifier can operate in one, two or three channel mode. The minimum impedance for single channel (bridged/mono) operation is 4 or 8 ohms. Tri channel
power is referred to stereo and mono at the same time. Minimum impedance remains the same for three channel (front / subwoofer) systems as long as proper
passive crossovers are used. Connect right and left speaker wire to corresponding speaker output terminals of the amplifier. Be sure to have the positive wire
from the speaker connected to the positive speaker terminal of the amplifier and the negative wire from the speaker must connect with the negative speaker
terminal of the amplifier. Reversing any of these connections will result in the speaker cones moving out of phase which causes bass cancellation. See Fig.3
Speaker Output Connections.
Fig.4.