Century PM-1763AA - Manual (Page 5)

6 Place floorboard in Playard/Crib
with padded side facing up.
NOTE: DO NOT install floorboard if using
bassinet. Go to bassinet assembly section.
7 Secure ends of floorboard to
Playard/Crib:
• Pass Attachment Straps
through holes in
Playard/Crib floor.
• Secure straps to underside
of Playard/Crib floor.
Playard/Crib assembly is now complete
and ready to use.
1 Lay bassinet on flat surface
and spread open.
2
Rotate and extend four (4)
Hooks until they “click” in
place.
3 If floorboard is installed in
Playard/Crib, remove
floorboard.
4
Fold Floorboard into “W”
shape and place in center
of bassinet.
4
ASSEMBLY and USE continued
WARNING
To prevent child from
suffocating, attachment
straps MUST be secured
to underside of
Playard/Crib.
Hook
Bassinet
Attachment
Strap
WARNING
Avoid serious injury or death:
• Use bassinet with infant who weighs less
than 8.2 kg (18 lbs.) and is less than
63.5 cm (25 inches) tall.
• DO NOT use without floorboard being
properly placed in bassinet.
• Discontinue use of bassinet if infant can
push up on hands and knees or sit
unassisted.
• DO NOT carry bassinet with infant in it.
• DO NOT use as a car bed.
• SUFFOCATION HAZARD: To help prevent
suffocation from entrapment, use only
floorboard provided by Century. NEVER
use additional mattress or padding.
Floorboard