CatEye MSC-2Dx - Manual (Page 18)

MSC-2Dx 18
Memory Record Interval Feature
Memory Record saves elapsed time, heart rate, speed and trip distance at the specified time interval in a
selected file. You can choose from 4 time intervals (5, 15, 30 and 60 seconds) and record them to 5
separate files.
• When the Memory Record is on, icon appears in the middle display.
• Memory Record data can only be erased from the individual file it was recorded to.
• The data is downloadable to a PC through the optional interface unit.
The total memory capacity is 2560 points. Used memory of each file is shown as a percentage of the total
available.
NOTE !: Memory Record capacity and Lap feature's memory capacity are independent.
0.00.00 0.00.05 0.00.10 0.00.15 0.00.20 0.00.25 0.00.30 0.00.35 0.00.40 0.00.45 0.00.50 0.00.55 0.01.00 0.01.05 0.01.10 0.01.15 0.01.20 0.01.25 0.01.30 0.01.35 0.01.40
0.00.00 0.00.15 0.00.30 0.00.45 0.01.00 0.01.15 0.01.30
0.00.00 0.00.30 0.01.00 0.01.30
0.00.00 0.01.00
Start
Measurement
Timing
60 sec.
Timing
30 sec.
Timing
15 sec.
Timing
5 sec.
Max.
measurement time
42h. and 40min.
Max.
measurement time
21h. and 20min.
Max.
measurement time
10h. and 40min.
Max.
measurement time
3h. and 33min.
(Max. 2560 points)
Memory record timing sec.(interval)
Procedure for Memory Record
Take the following steps to record data to memory.
Select Time Interval
Select file to memory record to.
Start Memory Record function by
pressing Start/Stop
See page 19
See page 20
See page 21
Memory record data saving file, F-1 to F-5