Chauvet 260-LED - Manual (Page 6)

Q-Wash 260-LED QRG
Page 6 of 10
Menu Options
1 st Level Programming Levels Description
INTRO
ADDRESS 001~512 Selects a starting DMX address
RESET NO/YES Resets the product’s custom settings
FANS
HIGH Select the fan’s operation mode.
NOTE: Fixture’s controller will force the fan to High if the
product’s internal temperature becomes too high, despite any
manual or DMX setting
NORMAL
LOW
AUTO
RUN
DMX512 Selects DMX running mode
AUTO1 Selects the first automatic program
AUTO2 Selects the second automatic program
CUSTOM Selects the user customizable program
SOUND1 Selects the first sound program
SOUND2 Selects the second sound program
SLAVE Selects the Slave running mode
TEST Starts the product’s test sequence
CHANNELS
BASIC Selects the 9-channel DMX mode
ADVANCED Selects the 12-channel DMX mode
DISPLAY
60 CLOSE Turns off the display after 60 seconds
BRIGHT Keeps the display on
KEYLOCK NO/YES Activates/deactivates the control panel password
DIMMER
DIMMER 4~1 Slow (DIM 4) to fast (DIM1) dimmer curves
DIMMER 0 Linear dimmer
INFO EDITION Shows the version of the installed S/W
INVERT
PAN
NORMAL/
REVERSE
Defines the pan direction
TILT Defines the tilt direction
DIMMER Defines the direction of the dimmer fader
USE NO/YES Activates the changes
RANGE
P/START
000~255
Sets the pan start point (restricted range)
P/FINISH Sets the pan end point (restricted range)
T/START Sets the tilt start point (restricted range)
T/FINISH Sets the tilt end point (restricted range)
USE Activates the changes
SPECIAL
BLACKD NO/YES Activates the move-in black delay (3 s)
RESET
DMX The DMX controller can reset the product
SYSTEM The control panel can reset the product
POWER
NORMAL/
HIGH
LEDs illuminate at normal or high intensity
NOTE: The product will return to Normal if the internal
temperature becomes too high
COLOR
UC White output matches that of older products
RGBTOW White output set by RGB-W
OFF White output defined by RGBW faders
FAN
DMX The DMX controller can set the fan speed
SYSTEM The control panel can reset the fan speed
DMXERROR
SAVE
In case of lost DMX signal, the product will remain in its current
state
BLAK In case of lost DMX signal, the product will blackout
EDIT
STEP
000~255
Selects the program step
PAN Selects the pan position
TILT Selects the tilt position
SPEED Selects the pan/tilt speed
1st Level Programming Levels Description
EDIT (Cont.)
RED
000~255
Combines red, green, blue, and white to obtain a custom color GREEN
BLUE
DIMMER Selects the dimmer value
STROBE Selects the strobe frequency and mode
DIMSPEED Selects the dimmer speed
TIME Selects the step duration
USE NO/YES Activates the changes
EXTRA PASSWORD **** Opens the Extra menu (see below)