Cambridge Audio CD5 - Manual (Page 13)

Programming disc play
1. Ensure that a disc is loaded and the player is in Standby mode.
2. Press Program on the remote control. The Program set-up will appear
in the display.
3. Using the Skip/Scan buttons, skip to the track number that you want
to program as your first track (or press the actual track number on
the remote).
4. Press Program. The desired track is now entered and the program
number increases by one.
5. Repeat steps three and four until all your desired tracks are entered.
6. Press Play/Pause. The programmed tracks will play.
7. You can use the Skip/Scan functions on your remote control to move
through your programmed selection in the same way as normal play-
back.
8. Pressing Stop once will stop play and pressing Stop twice at any time
will wipe the program and return the player to stopped mode.