Vermont Casting ACSM - Manual (Page 9)

9
The Vermont Castings Majestic Products Company
Door Glass Replacement Parts
Glass - Addison 30000664
Gasket, 3/4” Flat Window-Blk 30000776
Clip 1601396
Knob, Therm-Maple 1600660
Stub, Control Door 1601981
1. Unplug the electrical supply to the unit.
2. Let the fireplace cool if it has been operating.
3. Move the fireplace away from the wall to gain access
to the rear of the unit.
4. Locate the firebox mounting brackets on the side of
the firebox. Remove the screws securing the firebox to
the mounting brackets (Figure 1).
5. Remove firebox by sliding it rearward out of the casing.
6. Gently place firebox on its back on the floor.
7. Locate the glass clips on the inside surface of the
front casting. Remove the glass, and clear the area of
any glass fragments (Figure 3).
8. Secure new glass (with gasket) to the inside surface of
the front casting, reversing the process above, making
sure the glass is placed with gasket covering the bottom
and sides of the glass. (Figure 3).
9. Reinstall firebox into casing, by reversing steps 1
through 6.
DOOR GLASS REPLACEMENT INSTRUCTIONS
Figure 3: Door assembly
Glass
Clips
Glass
Gasket