CBC ZN-LN8048NHA - Manual (Page 4)

v2.0 - English
4
This manual is intended for persons authorized to install and operate this camera and
other VCS products. International, national and any relevant regional regulations relating
to electronics must be observed at all times.
Conventions
In this manual, the following symbols and notations are used to draw attention to special
situations:
Attention! This symbol indicates tips and notes that make using the device
easier and more convenient.
Hazard! This symbol indicates that failure to follow the safety instructions
given may directly endanger people, cause damage to the system or to other
equipment. This symbol represents a direct threat of danger.
The following typographic conventions are used in this manual:
Configuration menu names and window and key names and parameters
[Enter], [C] separate key names
[Ctrl] + [C] two or more keys pressed simultaneously
ping command line input and output
-
Intended Use
This camera is intended to transmit video and control signals via Ethernet data networks.
This camera is designed for use in CCTV systems.
The connection of an external alarm sensor allows functions to be triggered automatically.
Other unauthorized applications are not permitted.
If you have any additional questions concerning the use of these devices which are NOT
answered in this manual, please contact your dealer.
This camera is compatible with following VCS products: VideoJet10e and VIDOS software.
INTRODUCTION