CBC ZN-LN8048NHA - Manual (Page 7)

v2.0 - English
7
Multicast functions
This camera utilizes MPEG-4 compression technology. Thanks to efficient encoding, the
data transmission rate remains low, even with maximum image quality at 25 images per
second; furthermore, it can be adapted to meet the bandwidth requirements of various
network infrastructures.
In appropriately configured networks, the multicast function permits the simultaneous video
transmission in real time to several receivers. A requirement for this to function properly is
the implementation of the UDP and IGMP protocols on the network.
Configuration
This camera can be configured with a browser via the local area network or
through the Internet. Firmware updates and the quick uploading of device
configurations are handled in the same way. Please note that disconnecting
the camera or power supply while the firmware update is still in progress can
cause serious damage to the camera.
Summary
Ø Video and Data Transmission over LAN / WAN networks
Ø Digitally optimized video data
Ø Automatic Iris Control
Ø Integrated Computar Varifocal lens
Ø Multicast or video streaming multicast connection
Ø Local analog (NTSC / PAL) video output
Ø 25 FPS (at high resolution)
Ø MPEG-4 or M-JPEG
Ø Integral Ethernet interface 10/100 Base-T RJ-45
Ø Remote control of internal functions via TCP and UDP
Ø 3-step Password Protection
Ø 2 Alarm Inputs (NO or NC)
Ø 1 Relay (NO or NC)
Ø Automatic connection on alarm
Ø Integrated motion detector
Ø Firmware upgrade by flash memory
Ø Bi-directional audio transmission