Canon PIXMA K10335 - Manual (Page 20)


5
14 13
E
D
F
Windows Macintosh
When the Start Print Head Alignment dialog box appears, click
Align Print Head.
Click OK in the subsequent message.
Printing of the pattern starts.
If you align the Print Head automatically again, patterns different from those shown above may be
printed.
•
Make sure that the pattern shown is printed, then click Next on the Print Head
Alignment screen.
Some parts of patterns printed on the first page are faint.
When Print Head Alignment cannot be executed properly, the Alarm lamp (F) will flash orange 11
times. In this case, refer to "When Printing Becomes Faint or Colors Are Incorrect" in the on-screen
manual: Basic Guide.
•
Pull out the Front Tray Extension (E) beforehand. •
Wait until the pattern printing ends (about 5 minutes), and go to
the next step.
•
Do not open the Top Cover (D) while printing. •