CREATIVE Sound BlasterAxx SB1390 (SBX10) - Manual (Page 23)

Using the Bluetooth® Wireless Feature
You can stream music from your Bluetooth enabled devices to your SBX 10 / SBX 20.
Enjoy audio from your Bluetooth enabled devices
Enjoy your favorite music from your Bluetooth devices; simply follow these steps to connect them.
Action LED Status Status
Connect the Sound
BlasterAxx SBX 10 / SBX 20
to a computer or a power
supply SBX 10 / SBX 20 LED button
and Touchpad are lit SBX 10 / SBX 20 is powered
ON once plugged in
Press and hold CONNECT
button for 4 seconds SBX 10 / SBX 20
Bluetooth LED blinks
rapidly and changes from
white to blue Pairing mode. Ready to be
paired with new device
Turn ON the Bluetooth
feature on your device.
Search and select "Sound
BlasterAxx SBX 10" or
"Sound BlasterAxx SBX
20". If password is
required, enter 0000 and
connect to it SBX 10 / SBX 20
Bluetooth LED lit Ready to stream music
Note:
The SBX 10 / SBX 20 will exit from pairing mode if no device is paired within 1 minute.
To disconnect and remove all Bluetooth pairings, press and hold the CONNECT button for 10 seconds.
Reconnect your Sound BlasterAxx to the PC by setting it as the default audio device:
For Windows,
i. Go to Control Panel and click Sound.
ii. Click the Playback tab, select Sound BlasterAxx SBX 10 or Sound BlasterAxx SBX 20, then
click the Set Default button.
iii. Click the Recording tab, select Sound BlasterAxx SBX 10 or Sound BlasterAxx SBX 20, then
click the Set Default button.
For Mac,
i. Go to System Preferences and click Sound.
ii. Click the Output tab, then select Sound BlasterAxx SBX 10 or Sound BlasterAxx SBX 20.
iii. Click the Input tab, then select Sound BlasterAxx SBX 10 or Sound BlasterAxx SBX 20.