Chauvet 6 - Manual (Page 17)

COLORado™ 6 User Manual 17 7/1/2009 4:46 PM
Menu Map
M AIN F UNCTION S UB -F UNCTION S ELECTION I NSTRUCTION
Static color
Dimmer
000 ~ 255
(0 ~ 100%)
*Strobe range
is 0 ~ 20
User can combine Red, Green and Blue to
generate a custom color
Select strobing frequency between 0 and 20 Hz
Red
Green
Blue
Color Macros
Strobe
DMX512 001 ~ 512 Sets the DMX starting address
Personality
Stage 1 12-channel mode
Stage 2 10-channel mode
Pixel 9-channel mode; RGB control for each module
Arc 1 3-channel mode; RGB mode
Arc 1+D 4-channel mode; RGB+D mode
Run Mode
DMX Allow DMX control
CON Allow COLOR-CON control
Auto program
1
Choose from 8 Automatic programs
2
3
4
5
6
7
8
Settings
ID address 01 ~ 66 Assigns the ID address to a fixture
ID ON/OFF On ~ Off Either enables or disables ID addressing
ADAS faders no 01 ~ 244
Sets the number of ADAS channels for use
when automating DMX channel assignment
ADAS ON/OFF On ~ Off
Enables the Automatic DMX Addressing
System
ADAS copy On ~ Off
When activated the DMX512 address assigned
by the ADAS will become permanent on the
fixture
Factory settings Reset confirm Resets fixture to factory default settings
Dimmer start [001] or [005] Modify the dimming curve starting value
Password
ON/OFF On ~ Off
When password is set to on the control panel
will ask for a password each time the control
panel is accessed
Set Password
[
▲▼▲▼▲▲▼▼ ]
Use UP and DOWN buttons to set and press
SET to confirm
Note! If you forget the password use the
following factory password:
UP, DOWN, UP, DOWN, UP, UP, DOWN,
DOWN
Manual Power ON/OFF
The COLORado™ 6 can be turned on and off using the control panel.
P OWER A CTION
Turn OFF
When {MENU} is displayed in the LCD panel, hold down the (EXIT) button for 3
seconds to turn off the fixture.
Turn ON Hold the {EXIT} button for 3 seconds to turn power on.