Crestron electronic CNWM - Manual (Page 23)

CRESTRON
the paper that surrounds the buttons. It is possible that the CNWM can be
reprogrammed and thus the description labels on the Inlay Card beneath the plastic
cover no longer apply. The SP-LK label kit can be used to create professional
looking mouse inlay cards.
Remove Cover
Simply remove the clear plastic cover by inserting a flat lever such as a small
flathead screwdriver into the opening above the largest keypad button. Apply a small
amount of pressure with the flat lever to disengage the tongue and groove
connections of the plastic cover with the rest of the unit. Write functional
descriptions on the paper with a ball point pen or replace the existing sheet with one
that has been printed with typed descriptions using the aforementioned .DXF file.
Fasten Cover
The first step to fasten the cover is to insert the curved-end tongue of the plastic
cover into the appropriate groove of the unit. Lower the cover inserting the tongue
from one side of the plastic cover into the appropriate groove of the unit. Slightly
bend the plastic cover and simultaneously apply pressure down to insert the
remaining tongue into place.
Operations Guide - DOC. 5700A Wireless Mouse • 19