Carrier Access Thermidistat User Manual
Page 12
T H E R M I D I S TAT C O N T RO L C O N F I G U R AT I O N R E C O R D
Date
Owner/Operator
A) Hardware Configuration
Switch A ____ AC/HP Select. (OFF = AC)
Switch B ____ 1 or 2-Speed Compressor. (OFF = 1-Speed)
Switch C ____ Smart Recovery. (OFF = Enable)
Switch D ____ Installer Test. (OFF = Disable)
Thermidistat Model No.
B) Mode Settings
____ Hold (On or Off)
____ Mode (Off, Heat, Cool, Auto, Eheat)
____ Heating Set Point Value
____ Cooling Set Point Value
____ Fan (Auto or On)
C) Configuration Options
D) Schedule
E) Humidity Settings
Heat Mode Cool Mode
Selection
Set Point%
Display
Normal Humidify
_________
(hu)
Fan Humidify
_________
(hu, Fan)
Auto Humidify
_________
(hu, AUTO)
Auto and Fan Humidify
_________
(hu, AUTO, Fan)
Humidify Off
no set point
(hu, OF)
1
______ Anticipator (1-9: factory default = 3)
2
______ Clean Filter Timer (Off or 1-9: factory default = 2)
3
______ Fahrenheit or Celsius (F or C: factory default = F)
4
______ Fan On with W (Off or On: factory default = Off)
5
______ Variable Speed ICM Motor (Off or On: factory default = Off)
6
______ Cooling Lockout Below 55
°
F (Off or On: factory default = Off)
7
______ Variable Speed Superdehumidify (Off or On: factory default = Off, or Not Available)
8
______ Auxiliary Heat Lockout Setting (Off or 5-55
°
F: factory default = Off, or Not Available)
9
______ Intelligent Heat Staging Selection (Off or On: factory default = Off, or Not Available)
10
______ Dual Fuel Equipment Selection (Off or On: factory default = Off, or Not Available)
11
______ Balance Point Setting (Off or 5-55
°
F: factory default = Off, or Not Available)
12
______ Defrost Heat Select (0, 1, 2, 3: factory default = 0, or Not Available)
13
______ Room Temperature Offset (-5 to +5: factory default = 0)
14
______ Heat/Cool Dead Band (0 to 6: factory default = 2)
15
______ Enable Auto Mode (On or Off: factory default = On)
16
______ Enable Super Comfort Heat Mode (Off or On: factory default is Off, or not Available)
17
______ Enable Non-Programmable Operation (nP or P: factory default is P for programmable)
Mon
Tue
Wed
Thu
Fri
Sat
Sun
TIME HEAT COOL
TIME HEAT COOL
TIME HEAT COOL TIME HEAT COOL
WAKE
DAY
EVE
SLEEP
A99015
Selection
Set Point%
Display
Normal Dehumidify
_________
(d hu)
Cool to Dehumidify
_________
(d hu, COOL)
Dehumidify Off
no set point
(d hu, OF)
E) Vacation Humidity Settings
Heat Mode Cool Mode
Selection
Set Point%
Display
Normal Humidify
_________
(hu, OUT)
Auto Humidify
_________
(hu, OUT,AUTO)
Auto and Fan Humidify
_________
(hu, OUT,AUTO, Fan)
Humidify Off
no set point
(hu, OUT, OF)
Selection
Set Point%
Display
Normal Dehumidify
_________
(d hu, OUT)
Cool to Dehumidify
_________
(d hu,OUT,COOL)
Dehumidify Off
no set point
(d hu, OUT,OF)
✂
Cut and Sa
v
e
f
or Customer File
Copyright 1999 CARRIER Corp. • 7310 W. Morris St. • Indianapolis, IN 46231
tstt23si
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Book 1
4
Tab
misc. misc.
PC 101
Catalog No. 03TS-TA17
Printed in U.S.A.
Form TSTAT-23SI
Pg 12
8-99
Replaces: TSTAT-19SI