Using the mobile phone – Cardo SCALA RIDER G4 User Manual

Page 13

Advertising
background image

En

gli

sh

7.2 CABLE CONNECTING YOUR MP3 PLAYER OR OTHER

EXTERNAL AUDIO SOURCES

Using the auxiliary line-in port for cable connectivity
The G4 has an auxiliary jack which allows you to connect non-

Bluetooth audio sources, such as MP3 players (with 3.5 mm - 1/8” stereo

jacks) to the G4 by using the enclosed cable.
1. Make sure the G4 is on Standby mode, flashing slowly in Blue.

MP3 /Aux

Jack

2. Connect the MP3 cable to your

MP3 player/audio source’s

Jack and insert the other

end of the cable into the

Auxiliary Jack.

3. Operate the MP3 Player

device by using its own buttons as usual (FF/REW/ PLAY/PAUSE).

Volume can be adjusted through the MP3 Player or the Volume

Buttons of the G4.
Any other audio connection will automatically mute the MP3 Player. The

audio signal will return only when the G4 is once again in Standby mode.

NOTE: While listening to your MP3 player, the VOX feature is disabled.

8. USING THE MOBILE PHONE

INITIATING AND RECEIVING MOBILE PHONE CALLS

BASIC FUNCTIONS

Answer a call

Tap the Mobile Button or speak loudly any

word of your choice during an incoming call

Reject a call

Remain silent for 15 seconds, or press and hold

the Mobile Button for 3 seconds during an

incoming call

Terminate a call

Tap the Mobile Button during a call, or let the

other party terminate the call

Voice Dial

During Standby, tap the Mobile Button and

pronounce loudly the name of the person you

wish to call. This feature is supported only by

mobile phones that include the Voice Dial feature

Redial

During Standby, tap the Mobile Button twice

ADVANCED FUNCTIONS FOR 3-WAY COMMUNICATION:

Add/Remove CHANNEL 

“A” to/from phone call

Tap the CHANNEL “A” button while on a phone

call

Add/Remove CHANNEL 

“B” to/from phone call

Tap the CHANNEL “B” button while on a phone

call

When the G4 is on an active phone call, any Intercom call request will

be automatically rejected.
Once the phone call is terminated, you can initiate and accept

Intercom calls.
STATUS LIGHTS

LED Indication

Status

None

G4 is off

1 blue flash every 3 seconds 

Standby – No call is in progress

2 blue flashes every 3 seconds Call is in progress / FM Radio or Music

is ON

1 red flash every 3 seconds

Standby - Battery is low

2 red flashes every 3 seconds

Low battery while a call is in progress or

FM Radio or Music is ON

Solid red

Charging

13

scala rider

®

G4

PowerSet

Advertising