Panasonic SPX900 - Manual (Page 94)

94
8-2-5 LCD MONITOR
8-2-6 GENLOCK
8-3 PAINT
8-3-1 ROP
The ____ in the Adjustable Range column indicates the preset
mode.
Items/
Data Saved
Adjustable
Range
Remarks
BRIGHTNESS –7
:
+0
:
+7
Adjust the LCD monitor brightness.
– C U F –
COLOR LEVEL –7
:
+0
:
+7
Adjust the LCD monitor chroma level.
– C U F –
CONTRAST –7
:
+0
:
+7
Adjust the LCD monitor contrast.
– C U F –
BACKLIGHT HIGH
NORMAL Select whether or not to set the LCD monitor
brightness to always high.
HIGH:
Set to always high.
NORMAL: The brightness changes
according to the BRIGHTNESS
setting.
– C U F –
SELF SHOOT NORMAL
MIRROR Select whether or not to change the LCD
monitor to mirror image.
NORMAL: Do not change to mirror image.
MIRROR:
Change to mirror image.
– C U F –
ASPECT CONV. LT.BOX
SQUEEZE
Select a screen ratio for images displayed
on the LCD monitor.
LT.BOX: Display images in the letter box
size.
SQEEZE: Display images in the squeeze size.
<Note>
This item is enabled only when ASPECT
described in “8-2-1 SYSTEM MODE” is set
to16:9.
– C U F –
Items/
Data Saved
Adjustabl
e Range
Remarks
GENLOCK INT
EXT Switch the camera synchronising signal.
INT:
Synchronise with the internal
reference signal regardless of the
reference signal input to the
GENLOCK IN terminal.
EXT: Synchronise with the reference signal
input to the GENLOCK IN terminal.
– C U F E
H PHASE
COARSE –50
:
+00
:
+50
Perform coarse phase adjustment for
horizontal hold when configuring a system.
– – – – –
H PHASE FINE –160
:
+000
:
+160
Perform fine phase adjustment for horizontal
hold when configuring a system.
<Note>
This adjustment simultaneously shifts the SC
phase.
– – – – –
SC PHASE
COARSE 0
1
:
3
Perform coarse SC PHASE adjustment when
GENLOCK is set.
– – – – –
SC PHASE
FINE –75
:
+00
:
+75
Perform fine SC PHASE adjustment when
GENLOCK is set.
<Note>
When adjusting GENLOCK, please adjust H
PHASE first, and then adjust SC PHASE.
– – – – –
Items/
Data Saved
Adjustable
Range
Remarks
MASTER PED –200
:
+008
:
+200
Set the master pedestal level.
S C U F E
MASTER DTL –31
:
+00
:
+31
Set the H Detail and V Detail levels.
S C U F E
MASTER
GAMMA 0.35
:
0.45
:
0.75
Set MASTER GAMMA in 0.01 steps.
S C U F E
KNEE POINT 70.0%
:
85 0%
:
107.0%
Set the KNEE POINT position in 0.5% steps.
S C U F E
KNEE SLOPE 0
:
50
:
99
Set the KNEE slope.
S C U F E
R GAIN –200
:
+000
:
+200
Set the Rch gain.
S C U F E
G GAIN –200
:
+000
:
+200
Set the Gch gain.
S C U F E
B GAIN –200
:
+000
:
+200
Set the Bch gain.
S C U F E
R PEDESTAL –100
:
+000
:
+100
Set the Rch pedestal level.
S C U F E
G PEDESTAL –100
:
+000
:
+100
Set the Gch pedestal level.
S C U F E
B PEDESTAL –100
:
+000
:
+100
Set the Bch pedestal level.
S C U F E