Canon SCANFRONT 300 User Manual
Page 21
15
4.
Confirm the [Device name] and [IP address].
5.
Press [Device name] (or [IP address]).
A keyboard entry screen appears.
Press [Shift] to switch, the entry screen to capital letters.
6.
Enter the new device name (or IP address), and
press [OK].
IMPORTANT
• The device name is the name used to identify the scanner on
the network. When changing this setting, make sure to select
a unique name that is different from those of all other devices.
• The device name can be a combination of letters (A-Z, a-z),
numbers (0-9), and hyphens (-) up to 15 characters long.
• The device name must begin with a letter. You cannot end the
device name with a hyphen.
7.
Confirm the new device name and IP address, and
press [OK].
8.
Press [Close] to return to the Home screen.
9.
Press [Power off] to restart the scanner.