Creda MBO50 - Manual (Page 18)

16
Using the the Delay/Stand Feature
The Delay/Stand Pad is used as a timing pad either before, during or after a cooking programme. When the Delay/Stand Pad is
selected with a time, there is no microwave power in the oven during this time.
1. To Set a Standing Time:
● Press the Delay Pad ● Set Delay time (max 9hrs
99mins) (10 min. pad is
inoperable) An “
H
” will
appear in the display to
denote hours. The minute
pad enters hours and the
sec pads enter the minutes.
● Set the complete cooking
programme, by entering
power level and time
required.
● Press Start Pad. Delayed
time will count down then
the cooking programme
will start.
● Set the desired
Cooking Programme, by
selecting power level and
time required.
● Then Press the Stand Pad. ● Set desired standing time
(max 9hrs 99mins) (10 min.
pad is inoperable) An “
H ”
will appear in the display to
denote hours. The minute
pad enters hours and the
sec pads enter the minutes.
● Press Start Pad. Cooking
programme will commence
after which the standing
time will count down.
2. To Set a Delay Start:
NB
1. If the oven door is opened during the stand or delay time, the time in the display window will continue to count down.
2. Delay Start cannot be used before an Auto Programme.
3. If the Delay Stand pad is pressed three times, this will turn off the auto guide system. “Operation guide off” will appear once.
The words will not now scroll in the display window. To turn the auto guide back on, press the Delay/Stand pad three times.
“Operation guide on” will appear, and then the words will scroll again.
Power level
&
Time
Power level
&
Time
inoperable
hours
inoperable
1min 10min
hours
1min 10min
Fast-Cook
This will provide an added boost of microwave power up to 1000 watts, for the initial part of the cooking time, when reheating
foods e.g. soup, baked beans.
● Press the Pad ● Select Cooking time ● Press Start