Cres Cor CO151HUA6B-Q1 - Manual (Page 13)

Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Ovens with
Microprocessor Controls
FL-2269
Rev. 10 (6/08) Page 13 of 13
5925 Heisley Road • Mentor, OH 44060-1833
The Product Keys provide automatic menu selections
(arranged in banks of 5 keys, max. 10 keys). Each Product
Key can be user programmed for desired mode (PROBE or
TIMED) and the required COOK, HOLD, and PROBE or
TIME setpoints.
Each Product Key Lights up when pressed “ON”.
The Product Key Light will go “OFF” when pressed a
second time or when changing any setpoint value. This
returns the control to manual operation.
Product Key Programming
Press the desired Product Key.
Press and hold the SET key until the Product Key light
begins to fl ash.
Enter the desired Mode, Cook, Hold and Probe/Time
values.
NOTE: Press the SET key after each value is changed or
added to accept and store a new setpoint.
4. To exit; Press the SET key for a few seconds until the
Product Key light is extinguished.
Extra Replacement Parts:
Product Key (5 Keys) 0848-072
For Hot Unit Replacement, See Page 9:
The Hot Unit suffi x number will be Q5 (5 Keys)
or Q10 (10 Keys) instead of Q1
1.
2.
3.
OPERATING INSTRUCTIONS
FOR OVENS WITH OPTIONAL PRODUCT KEYS
CONTROL PANEL
ON
OFF
POWER
TIME - TEMPERATURE
MODE
SELECT
START TEMP STOP OVEN
PROBE TIMED
HEAT COOK HOLD SET
SETPOINTS
HOLD
PROBE
TIME
COOK
RETHERM
POWER SWITCH CONTROL PRODUCT KEYS PROBE RECEPTACLE