Corega CG-WLBARGO - Manual (Page 40)

WLBARGO Manual
38 39 38 39
<LAN setting /DHCP server>
(1) Select [Enable] to enable DHCP server function. Default is [enable].
(2) Enter DHCP servers start IP and end IP.
(3) Then click on save button to save the setting.
<LAN setting/PC database>
The following table display the current connected users information, you can
add/edit/delete users data.
*Add a pc data : click on [add] to add a new user data.
(1) Enter the pc name and select PC obtain IP method.
(2) Configure the MAC address data of PC.
(3) Click [Add PC Data] to complete the setting.