Casio XJ-S63 - Manual (Page 10)

10
Turning on the Eco Mode reduces lamp brightness to save power. The projector’s cooling fan
also operates at a slower speed while the Eco Mode is turned on, which results in quieter
operation.
Turn on the Eco Mode when your priority is quieter operation. Turn off the Eco Mode when
your priority is maximum brightness.
To turn the Eco Mode on or off
Press [ECO] to toggle the Eco Mode on and off.
Note
(for USB port equipped model users)
Use the setup menu (page 11) to select the lamp mode when you have an external
device connected to the projector’s USB port.
Pressing the [FUNC] key displays the menu shown below.
You can use this menu to perform the operations described below.
z Adjust image brightness
Highlight “Brightness” and then press the [ENTER] key.
• This performs the same operation as pressing the [BRIGHT] key (
key) described on
page 5.
z Turn the Eco Mode on or off
Highlight “Eco Mode” and then press the [ENTER] key.
• This performs the same operation as pressing the [ECO] key (
U
key) described on
page 10.
z Select the aspect ratio of the projected image
Highlight “Aspect Ratio” and then press the [ENTER] key.
• This performs the same operation as pressing the [ASPECT] key (
key) described on
page 9.
Note
(for USB port equipped model users)
When you have an external device connected to the projector’s USB port, use the
[FUNC], [
], [
U
], and [ ] keys to control the connected device. For details, see the
“USB Function Guide” on the bundled CD-ROM.
Eco Mode
Using the [FUNC] Key