Capital Cooking Performance Series - Manual (Page 21)

17
before calling for service
CAUTION!
Before removing the toe kick panel, disconnect the
range from the electrical power supply. Reinstall the
toe kick panel before reconnecting the range to the
power supply and operating the range.
Before calling for service, check the following to avoid
unnecessary service charges.
Be sure to check these items first:
• Is there a power surge in the area?
• Is the household fuse blown or the circuit breaker tripped?
• Is the Range disconnected from the electrical supply?
IF THE BURNERS DO NOT IGNITE:
• Are the burner caps properly aligned on the burner bases
(sealed burners)?
• Are the burner ports clogged?
• Is a fuse blown or is the circuit breaker tripped?
• Is the manual shut-off valve closed, preventing the
flow of gas?
• Are the burner ports clogged?
• Is the spark igniter sparking (surface burners)?
DATA RATING PLATE:
The data rating plate shows the model and serial numbers
of your range. It is located behind the toe kick panel at the
bottom of the range. To access the rating plate, remove
the three toe kick attachment screws, then carefully
remove the toe kick panel.
NOTE:
The DATA RATING PLATE containing model #, serial #,
and gas type, is located on the inside left corner of the
Kickplate Panel.