Creda SFH24AW - Manual (Page 4)

25 +44 (0) 1733 456789 www.creda-heating.co.uk
Model Reference Rating Direct Acting Charge Charge Weight Number of
Element Load Acceptance (7hrs) Acceptance (8hrs) Core Bricks
TSF24K 70369KS 3.6kW 0.7kW 25.2kWh 28.8kWh 137kg 18
TSF32K 70379KS 4.8kW 1.1kW 33.6kWh 38.4kWh 176kg 24
TSF42K 70389KS 5.7kW 1.5kW 39.9kWh 45.6kWh 215kg 30
TSF Turbo
Commercial storage fan heaters
The heater retains up to 40% of its total
stored heat after 17 hours, allowing the
thermostatically controlled 2-speed
centrifugal fan to deliver rapid and
uniform heat.
Key features
• Smooth, rounded, modern appearance, compatible
with today’s home and office décor
• TSF Turbo uses economy tariff electricity,
operating particularly well on special daytime
economy periods
• Available in 3.6kW, 4.8kW and 5.7kW models
• More controllable, providing heat quickly
when required
• In-built direct element for out of season heating
using day rate electricity
• Fanned heat is faster and more even in distribution,
particularly near ground level
• Easy to use manual controls for room thermostat
and economy charge
• Single or 3 phase installation capability
User controls
• Charge input control
• Neon switch for fan
• Neon switch for direct acting element
• Heat output control
• Insulation - opacified silicaceous aerogel and
mineral fibre mat
• Storage Core - high density iron oxide compound
• Storage Elements - mineral insulated stainless
steel sheathed
• Protection - two level thermal safety overheat
• Supply - 230/240V AC single phase
Technical Specification
Dimensions
Product Selector
Model Height A Width B Depth C
TSF24K 672mm 776mm 250mm
TSF32K 672mm 926mm 250mm
TSF42K 672mm 1076mm 250mm
“
Creda TSF Turbo storage
fan heaters provide
controlled output space
heating with maximum
economy and flexibility.
”
Electric storage
heating