Cooper Lighting ADY071461 - Manual

(drywall)
Removing fixture head from housing
Drywall bracket
(4x)
Pan head screw
#8-32 x3/8"
assembly
Housing
Fixture head
with mounting plate
Visor and Non-Visor
Do not
Warning : Before starting any work ensure
that all sources of power are turned off. All
work must meet local/national codes and be
performed by a certified electrician.
mount fixtures vertically.
Installation Instructions
Vault C-Scroll Roundel
These installation instructions are valid with the above Ametrix styles.
Sheet 1 of 5
Large, INDOOR
SRR
(Semi-Recessed, Remote ballast)
ADY071461 REV A (ECN070344)
Pan head screws
#10-32 x5/8"
Store fixture in safe place.
1. Loosen all #10-32 x5/8" Pan head screws in keyhole slots
inside of fixture housing. (16 1/2" & 22 1/2" fixture sizes use
four(4) screws, 30 1/2 fixture sizes use six(6) screws"
2. Slide fixture head assembly to side and remove from housing.
3.
1.
Semi-recessed fixtures shown without thermal protectors
#8-32
(4x)
Removing brackets from fixture housing
(2x)
Cover plate
Universal bracket
Hex nut
(ceiling grid)
Thermal protector
cover plate
Exploded view and part call-out
(ceiling grid)
Exploded view and part call-out
(drywall)
all four #10-32 Hex nuts.
Pem-stud
Hex nut
#8-32
(4x)
Universal bracket
(2x)
1. Remove universal brackets from fixture housing by removing
1.