Cradlepoint mbr1400 (slickrock) product label, Getting started, Connect to a computer or other network equipment – Cradlepoint MBR1400 User Manual
Page 10: Continued)
8
Getting Started
(continued)
4. Connect to a Computer or other Network Equipment.
In order to access the MBR1400, establish a connection to the router. Connect wirelessly to the WiFi
broadcast, or with an Ethernet cable connected to your computer and then plugged into one of the
Orange Ethernet ports.
The default WiFi network name broadcast will be seen as “MBR1400-xxx”, where “xxx” is the last three
characters of your router’s MAC address, shown as SSID on the product label.
To connect to the WiFi, you will need to input the default password when prompted.
The default password is provided on the product label
found on the bottom of your router (see example below).
5. Use.
For most users, the MBR1400 Router can be used
immediately without any special configuration changes. If
you would like to change your network name, level of WiFi
security, etc. follow the First Time Setup Wizard steps on
page 9.
CradlePoint MBR1400 (Slickrock) PRODUCT LABEL
Made in Taiwan
RoHS
Model No.: MBR1400
Part No.: MBR1400
www.cradlepoint.com
H/W ver.: 1.0
12V 1.5A
MAC Address : 0030440c1fc1
Serial No.: MM100167900418
MFG DATE: NOV 2010
R01
FCC ID:UXX-MBR1400
IC: 6921A-MBR1400
Default Password : 440c1fc1
SSID: MBR1400-fc1