Canon M181011 - Manual (Page 7)

7
Installing the Software
1 Insert the Setup Disc into the computer’s
CD-ROM drive.
The setup menu automatically starts up when
you insert the CD-ROM into the drive. (If the
menu does not start up, execute setup.exe
from the CD-ROM.) 2 Click [Typical Installation].
3 Click [Install]. 4 Follow the instructions on the
screen to complete the installation. 5 Click [Exit] to close the
setup menu.
Before Installation
● Do not connect the scanners to the computer before
installing the software.
● Log on to Windows as an Administrator.
● Close all other applications before installing the
software.
● Make sure that the driver for the connected Canon
DR-series document scanner is already installed.
If you connect a scanner and turn it
ON before you install the software,
the following wizard screen will
appear. If this wizard is displayed,
click the [Cancel] button to exit the
wizard, and turn the scanner OFF.
For Windows Vista
If the following screen appears, enter
the current administrator password and
click [OK].