Canon M181011 - Manual (Page 13)

13
■ Connect the AC adapter only to a power outlet of the rated voltage
and power supply frequency (120 V, 60 Hz or 220-240 V, 50/60 Hz
depending on your region).
■ When unplugging the power cord, grasp it firmly by its power plug.
Do not pull directly on the power cord, as this may damage or
expose the cord’s internal wiring, resulting in a fire or electric shock.
■ Leave sufficient space around the power plug so that it can be
disconnected easily. If objects are placed around the power plug,
you will be unable to disconnect it in an emergency.
■ Do not allow water or flammable substances (alcohol, paint thinner,
benzene, etc.) to spill onto the flatbed, as this may result in a fire or
electric shock.
■ Turn OFF the power switch for safety when not using the flatbed for
a long period of time, such as overnight. Also, turn OFF the power
switch, and disconnect the power cord from the power outlet for
safety when the machine will not be used for an extended period of
time, such as during consecutive holidays.
■ Open and close the document cover gently. Failure to do so may
result in a malfunction or personal injury.
■ Be careful when closing the document cover to avoid pinching your
hands. Failure to do so may result in personal injury.
■ Do not press down hard on the document cover. Doing so may
result in damage to the glass, a malfunction, or personal injury.
■ Never place any object other than documents to be scanned onto
the scanning glass. Doing so may result in a malfunction or
personal injury.
■ When using the flatbed in cold temperatures, wait a few moments
after turning the power switch ON. Failure to do so may result in a
condensation error.
Disposal
When disposing the flatbed or AC adapter, make sure to follow the
local ordinances and laws or consult with your local authorized Canon
dealer or service representative.
When Sending the Flatbed for Repairs
If you need to send the flatbed out for repairs, use the packing box in
which it came. Firmly secure the flatbed with packaging material when
you place it in the packing box.
Features
The Flatbed Scanner Unit 101 is intended to be used in combination
with the Canon DR-series document scanners. The flatbed cannot
operate as a stand-alone unit
The main features of the flatbed are described below.
● Supports a Variety of Document Types
Connect the flatbed scanner unit to a Canon DR-series scanner to
enable flatbed scanning. The flatbed allows you to scan books,
magazines, thin document sheets, and a variety of other documents
that cannot be scanned using a feeder.
● High Image Quality
The flatbed enables high-quality 1,200 dpi scanning in 24-bit color,
grayscale, and black and white scanning modes.
● Document Cover Designed for Continuous Scanning
The folding document cover is designed to improve efficiency when
scanning by allowing you to replace documents without having to
open and close the cover for each document.
● Easy Scanning with One Button Touch
Press the start button to start job functions or the CaptureOnTouch
scanning application, and begin scanning the document placed on
the flatbed.
● Seamless Dual-Scanner Operation
Use two scanners to create a single scanned image from a single
scan procedure.
● Supports Legal Page Size
Scan documents as large as legal-size documents.
NOTE
The flatbed does not support all of the scanning options available on
the connected Canon DR-series scanner. (See “Supported
Functions” on p. 16.)