Computer Tech Link 910TF - Manual (Page 7)

English - 9 English - 8
SPECIFICATIONS
FACTORY PRESET TIMINGS
Mode H.Freq (KHz) V.Freq(Hz) Remark
VGA 480 640 X 480 31.5 60 Non-interlaced
VGA 400 720 X 400 31.3 70 Non-interlaced
VESA 46K 800 X 600 46.9 75 Non-interlaced
VESA SVGA 85 800 X 600 53.7 85 Non-interlaced
VESA 60K 1024 X 768 60.0 75 Non-interlaced
VESA 1024/85 1024 X 768 68.7 85 Non-interlaced
VESA 1280/75 1280 X 1024 80.0 75 Non-interlaced
VESA 1280/85 1280 X 1024 91.1 85 Non-interlaced
VESA 75 640 X 480 37.5 75 Non-interlaced
VESA 1600/75 1600 X 1200 93.8 75 Non-interlaced
Resolution
(dots X lines)
CDT Size 19-inch DynaFlat
Diagonal visible image area 18-inch
Dot Pitch 0.25 mm
Synchronization Horizontal 30 - 95 KHz
Vertical 50 - 160 Hz
Plug and Play DDC1/2B/CI
Power Saving EPA, VESA DPMS, Nutek Compliant
Power Source 100-240 Vac, 50/60Hz (Free Voltage)
Power Consumption 120 W
Dimension-W x H x D 466 x 475.5 x 465mm
(set with stand)
Weight-unpacked (lbs/Kg) 56.2/25.5
Operating Temperature 10 ~ 40°C /50 ~ 104°F
Self Diagnosis
When the monitor doesn’t display, if you press any key, Self
Diagnosis screen is displayed. Self Diagnosis function checks if
the status of the monitor is No Signal or Out of range.
No Signal screen is displayed when the
D-Sub signal connector is not connected
or the status of the monitor is on DPMS
mode.
Out of Range screen is displayed when
the applied frequency is under or over
normal range.
Normal range
H : 30 - 95 KHz
V : 50 - 160 Hz
Reset the screen to the Factory Preset
Display Settings.
Display a RGB Color Bar to determine
whether the screen color is expressed
normally or not.
TEST PATTERN
RECALL
Display horizontal & vertical frequency
and polarity.
STATUS
POWER SAVER
YES : VESA DPMS operation.
NO : NO DPMS operation.
ICON CONTROL FUNCTION
* The specifications are subject to change without notice.