Cobra Electronics FRS.200 - Manual (Page 5)

LCD DISPLAY
All the information you need is provided from this LCD display panel.
9
SELECTING A CHANNEL
Turn on your FRS 200.
To select a higher channel, push the UP
arrow key.
To select a lower channel, push the DOWN
arrow key.
**Note: To quick advance channels, press and
hold the selection key.
SAVE = Auto Battery Save feature indicator
LOCK = Lock key indicator
BATT = Battery low indicator
CALL = Call indicator
BUSY = Receiving incoming transmission indicator
TX = Transmitting outgoing communications indicator
= Volume level display
8
OPERATION
TURNING ON/OFF/AUTO SQUELCH
TURNING YOUR
FRS RADIO ON
Push and hold the power ON-
OFF key. The LCD display will
illuminate and an audible “Beep”
will be heard to indicate you
have turned the unit on.
TURNING YOUR
FRS RADIO OFF
Push and hold the power ON-OFF
key until the LCD goes blank.
AUTO SQUELCH
Your FRS 200 is equipped with
Auto Squelch. A unique circuit
design that keeps you from
hearing unwanted noise and
static. You can override the auto
squelch feature by depressing
and holding the monitor key.
Holding the monitor key will
allow you to hear weaker, distant
transmissions.
OPERATION
SELECT CHANNEL/DISPLAY
FRS.200 Manual 9/22/97 9:04 AM Page 9