CAT Articulated Truck 725 - Manual (Page 12)

12 725 Articulated Truck specifications
Sound Levels
Interior Cab 76 dB(A)
• The operator sound exposure Leq (equivalent sound pressure
level) measured according to the work cycle procedures
specified in ANSI/SAE J1166 OCT 98 is 76 dB(A), for the
cab offered by Caterpillar, when properly installed and
maintained and tested with the doors and windows closed.
• Hearing protection may be needed when operating with an
open operator station and cab (when not properly maintained
or doors/windows open) for extended periods or in noisy
environments.
Operating Weights
Front Axle – Empty 13 020 kg 28,704 lb
Center Axle – Empty 4830 kg 10,648 lb
Rear Axle – Empty 4410 kg 9,722 lb
Total – Empty 22 260 kg 49,075 lb
Front Axle – Rated Load 2010 kg 4,431 lb
Center Axle – Rated Load 10 790 kg 23,788 lb
Rear Axle – Rated Load 10 790 kg 23,788 lb
Total – Rated Load 23 590 kg 52,007 lb
Front Axle – Loaded 15 030 kg 33,135 lb
Center Axle – Loaded 15 620 kg 34,336 lb
Rear Axle – Loaded 15 200 kg 33,510 lb
Total – Loaded 45 850 kg 101,082 lb
Body Plate Thickness
Front 8 mm 0.31 in
Scow 14 mm 0.55 in
Side 12 mm 0.47 in
Base 14 mm 0.55 in
Service Refill Capacities
Fuel Tank 360 L 95 gal
Cooling System 86 L 22.7 gal
Hydraulic System 100 L 26.4 gal
Engine Crankcase 37 L 9.8 gal
Transmission 36 L 9.5 gal
Final Drives/Differential 132 L 34.9 gal
Output Transfer Gear Box 18 L 4.8 gal
Engine
Engine Model Cat ® C11 ACERT™
Gross Power – SAE J1995 230 kW 309 hp
Net Power – SAE J1349 225 kW 301 hp
Net Power – ISO 9249 227 kW 304 hp
Net Power – EEC 80/1269 227 kW 304 hp
Bore 130 mm 5.1 in
Stroke 140 mm 5.5 in
Displacement 11.15 L 680 in 3
• The power ratings apply at rated speed of 1,800 rpm when
tested under the conditions for the specified standard.
• The net power advertised is the power available at the
flywheel when the engine is equipped with alternator, air
cleaner, muffler and fan at minimum speed.
• Net power when the fan is at maximum speed is 210 kW
(282 hp) per the SAE reference conditions.
• The 725 meets EPA Tier 3/EU Stage 3a emission
specifications for the U.S. and Europe through 2010.
• No engine derating required below 3048 m (10,000 ft).
Weights
Rated Payload 23.6 tonnes 26 tons
Body Capacities
Heaped SAE 2:1 14.3 m 3 18.8 yd 3
Struck 11.1 m 3 14.5 yd 3
Heaped SAE 1:1 17.5 m 3 22.9 yd 3
Transmission
Forward 1 7.85 km/h 4.88 mph
Forward 2 14.82 km/h 9.21 mph
Forward 3 22.53 km/h 14 mph
Forward 4 34.55 km/h 21.47 mph
Forward 5 48.08 km/h 29.88 mph
Forward 6 56.78 km/h 35.29 mph
Reverse 1 8.7 km/h 5.41 mph