Clarion TTX001 - Manual (Page 5)

APPLICATIONS
The TTX001 can be operated in a number of applications. Find yours below.
With the VMA1131
1. Place tuner into the channel on the back of the monitor and slide the tab
into the slot. Mount tuner with the two machine screws supplied.
2. Plug the 16 to 16 pin cable (supplied with the monitor) into the tuner and
the back of the monitor.
3. Mount the antenna (ZCB-003 or equivalent) and plug into the antenna input
of the tuner.
4. Plug the power connector into the monitor and connect to vehicle accessory
and ground.
Operation
•
The tuner can be controlled by the buttons on the monitor or by the remote
control.
5
Figure 3- TTX001 with VMA1131