COBY SNAPP CAM5000 - Manual (Page 6)

Page 6 Getting Started
Engl
ish
Charging the Battery
Your video camera will charge when connected to a PC via
the USB plug. To begin charging:
Power OFF the video camera; connect the video 1.
camera to the PC via the USB connector.
Charging has begun when the charge indicator light
2.
turns red. The charge indicator light turns off when
charging is completed.
Turning the Video Camera On/Off
To turn on your video camera, press . Press again to turn
off the video camera.
Using a Memory Card
To maximize your video camera’s recording time, you may
wish to use a memory card. Your video camera supports
SD/SDHC card formats. To insert a memory card:
Open the battery/SD compartment door. 1.
Insert the SD card with the frontispiece of the card 2.
facing toward the LCD screen.
Close the battery door.
3.