Crate Amplifiers BT1000 - Manual (Page 3)

Declaration of Conformity
Manufacturer’s Name: SLM Electronics
Corporate Headquarters: 1901 Congressional Drive, St. Louis, Missouri 63146
Primary Production Facility: 700 Hwy 202 W, Yellville, Arkansas, 72687
Product Type: Audio Amplifier
Products meet the regulations for compliance marking under:
ETL standards UL6500 of UL813
CSA standards E60065 or C22.2 No.1-M90
CE safety standard EN60065
CE EMC standards EN55103 or EN55013 and EN61000
FCC standards 47CFR 15.107 and 15.109 Class B
C-tick designation Level 2, ABN #56748810738, ARBN# N222
KETI standard K60065 (limited model approval)
Compliance Support Contact: SLM Electronics, Attn: R&D Compliance Engineer
1901 Congressional Drive, St Louis, Missouri, 63146 • Tel.: 314-569-0141, Fax: 314-569-0175
3
Congratulations!
You are now the proud owner of the Crate BT1000 Bass Amplifier. The BT1000 features a clean
channel with a four-band rotary EQ and a footswitch-controllable Expander circuit for quick tone
changes. An active electronic tuner, conveniently located on top of the amplifier, allows you to get in
tune and stay in tune "on the fly." The Mute switch allows you to tune in silence without changing the
amp’s Level controls. The headphone jack allows for private practice sessions. A built-in Limiter
keeps your sound clean even at full output power levels, an effects loop is provided for adding your
favorite effects, and the balanced XLR jack with volume control lets you run your signal to the house
mixing board or a recording console.
Like all Crate products, your BT1000 is designed by musicians and built using only the best
components. Extensive testing at the hands (and ears) of skilled technicians and musicians insures
you that this amplifier is the absolute best it can be.
In order to get the most out of your new bass amp, we urge you to check out the information in
this guide before you begin playing.
And thank you for choosing Crate.
B T 1 0 0 0
Bass Amplifier