Vhf marine radio procedures – Cobra Electronics MR HH415LI VP EU User Manual

Page 12

Advertising
background image

7

Nothing Comes Close to a Cobra

®

VHF Marine Radio Procedures

VHF Marine Radio Procedures

Maintain Your Watch

Whenever your boat is underway, the radio must be turned On and
be tuned to Channel 16 except when being used for messages.

Power

Try 1 watt first if the station being called is within a few kilometers. If there
is no answer, switch to a higher power. This will conserve your battery
and minimize interference to other users.

Calling Coast Stations

Call a coast station on its assigned channel. You may use Channel 16
when you do not know the assigned channel.

Calling Other Vessels

Call other vessels on Channel 16. You may also call on ship-to-ship channels
when you know that the vessel is listening on a ship-to-ship channel.

Limits on Calling

You must not call the same station for more than 30 seconds at a time.
If you do not get a reply, wait at least two (2) minutes before calling again.
After three (3) calling periods, wait at least 15 minutes before calling again.

Change Channels

After contacting another station on a calling channel, change immediately
to a channel which is available for the type of message you want to send.

Station Identification

Identify your station by your call sign, ship name or other official number
at both the beginning and end of each message.

Prohibited Communications

You MUST NOT transmit:

False distress or emergency messages.

Messages containing obscene, indecent or profane words or meaning.

General calls, signals or messages (messages not addressed to a particular
station) on Channel 16, except in an emergency or if you are testing your radio.

When you are on land.

VHF Marine Radio Protocols

MRHH415EU-Body.qxp:400_Body 12/15/06 9:59 AM Page 7

Advertising