CHEVROLET S-10 - Manual (Page 112)

Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
• Turn and Lane Change Signals
• Headlamp High/Low-Beam Changer
• Flash-to-Pass Feature
• Windshield Wipers
• Windshield Washer
• Cruise Control
Turn and Lane-Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return
automatically.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by itself
when you release it.
As you signal a turn or a lane change, if the arrows
flash more quickly than normal, a signal bulb may
be burned out and other drivers won’t see your turn
signal.
3-6