Cooper Lighting UMX Series Watertight - Manual

663
INDUSTRIAL & HAZARDOUS LOCA
TION
Exit Signs
COOPER LIGHTING - SURE-LITES ®
• NEMA 4X Listed
• Dual-voltage input
120/277VAC, 60Hz
(Self-Powered Exits)
• Gray fiberglass housing
• Fully gasketed housing
• Tough, high contrast
polycarbonate lens
• AC: two F6T5 fluorescent
lamps
• DC: two 6V, 6W DC lamps
• Surface mount only
• Available with emergency
lighting heads mounted on
enclosure
• For operation in ambient
temperatures above 32°F
• Self-powered Exits feature
line-latching, solid-state
voltage limited charger,
solid-state switching,
low-voltage disconnect,
brownout circuit,
overload/short-circuit
protection, test
switch/power indicator
light
• UL 924 Wet Location
Listed, Life Safety NFPA
101, NEC/OSHA, most
state and local codes.
UMX SERIES
W e t L o c a t i o n
A C O n l y
S e l f - P o w e r e d
E X I T L I G H T I N G
Factory Options
DH=Two 6V, 7.2W Weatherproof Heads
(UMX101 thru UMX108 only)
TDM=Time Delay Monitor (Exits with Heads only)
TH=Thermal Heater for Battery Compartment (For Use
w/Lead Calcium Exits)
D I M E N S I O N S D E S C R I P T I O N
The UMX Series watertight
and corrosion-resistant exit
with tough polycarbonate lens
is designed for use where rain,
moisture, dust or corrosives
are present. Economical long
life fluorescent lamps provide
highly visible signage and
downlighting. The vibration
resistant lamps make the UMX
perfect for heavy industrial
applications (NEMA 4X Listed).
O R D E R I N G I N F O R M AT I O N
S A M P L E N U M B E R : U M X 7
Model Number
See chart Accessories (Order Separately)
DC Socket Kit
UDC6=Two 6V, 6.6W DC Lamps
UDC12=Two 12V, 7.5W DC Lamps
Vandal Shield
WG7=Wire Guard
VS2=Polycarbonate Vandal Shield
VS2WP=Polycarbonate Vandal
Shield/Weather Resistant
11 3/4" (298mm) 7 1/2" (191mm)
11 3/4"
(298mm)
O R D E R I N G I N F O R M AT I O N — A C O N LY E X I T S
Red Letters/White Background Green Letters/White Background
Voltage No Left Right Double No Left Right Double
Arrow Arrow Arrow Arrow Arrow Arrow Arrow Arrow
120 VAC UMX7 UMX6 UMX8 UMX5 UMX3 UMX2 UMX4 UMX1
277 VAC UMX71 UMX61 UMX81 UMX51 UMX31 UMX21 UMX41 UMX11
E n e r g y D a t a — A C O n l y E x i t s
UMX Exits
Input Power; Input Current (Max.): Power Factor: T.H.D.:
120V 277V 120V 277V 120V 277V 120V 277V
Fluorescent Exits-6W Lamps 19W 23W .33A .32A >.47 >.26 <6% <9%
O R D E R I N G I N F O R M AT I O N
S A M P L E N U M B E R : U M X 2 0 7
O R D E R I N G I N F O R M AT I O N — S E L F - P O W E R E D E X I T S
Red Letters/White Background Green Letters/White Background
Battery No Left Right Double No Left Right Double
Arrow Arrow Arrow Arrow Arrow Arrow Arrow Arrow
Lead Calcium UMX207 UMX206 UMX208 UMX205 UMX203 UMX202 UMX204 UMX201
Lead Calcium
Battery w/Remote
Capability
UMX107 UMX106 UMX108 UMX105 UMX103 UMX102 UMX104 UMX101
Nickel Cadmium UMX227 UMX226 UMX228 UMX225 UMX223 UMX222 UMX224 UMX221
W AT T A G E R AT I N G S
UMX201 – UMX208 Lead Calcium=18W for 1 1/2 hrs.; 15W for 2 hrs.
UMX101 – UMX108 Lead Calcium=27W for 1 1/2 hrs.; 24W for 2 hrs.
UMX221 – UMX228 Nickel Cadmium=15W for 1 1/2 hrs.; 12W for 2 hrs.
Model Number
See chart
E n e r g y D a t a — S e l f - P o w e r e d E x i t s
Charge Mode (Fully Discharged Battery) Sealed Lead Calcium Battery
Input Power; Input Current (Max.): Power Factor: T.H.D.:
120V 277V 120V 277V 120V 277V 120V 277V
Fluorescent Exits - 6W Lamps 41W 43W .51A .22A >.66 >.69 <14% <14%
Standby Mode (Fully Charged Battery) Sealed Lead Calcium Battery Input Power consumption is reduced by approximately 18 Watts in
the standby operating mode.
Sealed Nickel Cadmium Battery
Fluorescent Exits - 6W Lamps 29W 29W .42A .17A >.57 >.62 <9% <38%
Accessories (Order Separately)
WG7=Wire Guard
Vandal Shield
VS2=Polycarbonate Vandal Shield
VS2WP=Polycarbonate Vandal Shield/Weather Resistant
COOPER LIGHTING