2 getting started – Alcatel ONE TOUCH Fierce 2 User Manual
Page 6
9
10
1.2
Getting started
1.2.1
Set-up
Attaching or removing back phone cover
Inserting or removing SIM card
You must insert your SIM card to make phone calls. Before inserting/removing SIM card, ensure phone
is off to prevent damage.
To install SIM card, start by sliding the metal tray up to unlock position, tray will click and release when
unlocked. Place the SIM card into the slot with gold contacts facing downward. Once SIM card is placed
into slot, close metal tray, then slide tray down, tray will click when locked. Reattach back cover to
phone and power phone on. To remove SIM card, slide the metal SIM card tray to unlock position and
gently slide the SIM card out from slot.
Installing or removing battery
Before inserting/removing battery, ensure phone is off to prevent damage.
•
Insert battery into slot until locked in position, then close the battery cover.
•
Remove battery cover and unlock battery from slot, then remove.
Inserting or removing microSD™ card
Installing microSD card
• Power off your phone, remove back cover by pulling cover up and remove battery.
• Locate the microSD card slot located above top right corner of battery compartment.
• Insert the microSD card into the microSD slot with the gold contacts facing downward and gently
push in microSD card until it locks into slot.
• Reinsert battery into battery compartment until locked in position, then reattach the battery cover.
Removing microSD card
• To remove card, remove the battery cover and battery, then slide the microSD card from slot gently.
• Reinsert battery into battery compartment until locked in position, then reattach the battery cover.