HTC One M9 - Manual (Page 234)

Connectivity 221
Connect to a Wi-Fi Network via WPS
If you’re using a Wi-Fi router with Wi-Fi Protected Setup (WPS), you can connect your phone easily.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. If Wi-Fi connection is off, tap the WI-FI tile to turn it on.
3. Tap below the WI-FI tile and check the list of detected Wi-Fi.
4. Tap > WPS Push, and then press the WPS button on your Wi-Fi router.
Note: To use the Wi-Fi Protected Setup (WPS) PIN method, tap > WPS Pin Entry.
Disconnect from a Wireless Network
Quickly disconnect from a wireless network your phone is connected to.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. If Wi-Fi connection is off, tap the WI-FI tile to turn it on.
3. Tap below the WI-FI tile and check the list of detected Wi-Fi
4. You can:
l
Tap the wireless network that the phone is connected to, and then tap DISCONNECT.
l
If you want to remove the settings for this network, touch and hold the network name, and
then tap Forget network.
To connect to another wireless network, see Prevent Notifications from Unsecured Wi-Fi Networks .
Wi-Fi Direct
Use Wi-Fi Direct to connect directly to other Wi-Fi Direct devices simply via Wi-Fi, without an access
point or via the Internet.
1. With two fingers, swipe down from the status bar to open Quick Settings.
2. If Wi-Fi connection is off, tap the WI-FI tile to turn it on.
3. Tap below the WI-FI tile and check the list of detected Wi-Fi networks.
4. Tap > Wi-Fi Direct.
5. The Wi-Fi Direct settings menu appears.
l
Wi-Fi Direct and Wi-Fi are unavailable at the same time.
6. Tap a device with which to connect. If connected via Wi-Fi, you will see a confirmation. Follow
the onscreen instructions.
7. Accept the connection on the other device.