Kyocera Brigadier - Manual (Page 86)

Web and Data 75
• Scan to scan for Wi-Fi networks.
• WPS Pin Entry to set up a Wi-Fi Protected Setup connection by entering the PIN
on your router.
• Wi-Fi Direct to use a peer-to-peer Wi-Fi connection. The Wi-Fi client and the
hotspot operation will be disabled while Wi-Fi direct is enabled.
• Request via NFC to request the Wi-Fi details from another device using the NFC
feature. See Turn NFC On or Off on page 115 for enabling NFC.
• Advanced to configure advanced Wi-Fi settings, which include:
▪ Wi-Fi notifications to notify the Wi-Fi status connected or available.
▪ Keep Wi-Fi on during sleep to stay connected to Wi-Fi when the screen
goes to sleep to conserve mobile data usage.
▪ Scanning always available to let Google's location service and other apps
scan for networks, even when Wi-Fi is off.
▪ Avoid poor connections to avoid a Wi-Fi network unless it has a good
Internet connection.
▪ Wi-Fi frequency band to specify the frequency band for Wi-Fi.
▪ Install certificates to install the certificates for communicating via Wi-Fi.
▪ Wi-Fi optimization to minimize the battery usage when Wi-Fi is on.
▪ MAC address to display the Media Access Control (MAC) address of your
phone when connected to a Wi-Fi network.
▪ IP address to display the Internet Protocol (IP) address assigned to your
phone by the Wi-Fi network you are connected to (unless you used the IP
settings to assign it a static IP address).
• Help to access the help menus for Wi-Fi.
Data Services
The following topics will help you learn the basics of using your data services, including
managing your user name, launching a data connection, and navigating the Web with your
phone.
Important: Certain data services requests may require additional time to process. While your
phone is loading the requested service, the touchscreen may appear
unresponsive when in fact they are functioning properly. Allow the phone some
time to process your data usage request.