LG G3 Vigor User Manual

Page 24

Advertising
background image

Phone Basics

15

When the battery reaches 2% of its capacity, the battery icon blinks. When there are approximately 
two minutes of talk time left, the phone can sound an audible alert and then turn off.

Note: Long backlight settings, searching for service, using vibrate mode, browser use, and other 
variable may reduce the battery’s talk and standby times.

Tip: Watch your phone's battery level indicator and charge the battery before it runs out of power.

Charge the Battery

Keeping track of your battery's charge is important. If your battery level becomes too low, your 
phone automatically turns off and you will lose any information you were just working on. 

 1.  Connect the charging adapter and USB cable as shown; the LG logo on the charging adapter 

should face toward you.

 

 2.  Plug one end of the USB cable into the phone's Charger/Accessory Port and the other end into 

an electrical outlet. The charge time varies depending upon the battery level. 

Battery Temperature Protection

Though extremely rare, if the battery becomes overheated, the phone will automatically turn off.

Charge with USB

You can use your computer to charge your phone. To be able to charge with the USB cable, you 
need to install the necessary USB drivers on your computer first. Connect one end of the USB cable 
to the Charger/Accessory Port on your phone and connect the other end to a USB port on your 
computer. It is best to use the rear USB port when connecting to a desktop computer. The USB hub 
should be powered by an external power source.

Note: Low-power USB ports are not supported, such as the USB port on your keyboard or bus-
powered USB hub.
The LG USB Driver is downloadable from the following site: 

http://www.lg.com/us/

 > Select 

SUPPORT. In the Search box next to SEARCH PRODUCT SUPPORT, enter the model name or 
name and click SEARCH. Click the model. On the PRODUCT SUPPORT page, click on Software
Update & Drivers
.
Always unplug the charger from the wall socket after the phone is fully charged to save unnecessary 
power consumption of the charger.

Advertising