Vertical Communications R DSU User Manual
Page 15
Next to the MESSAGE button (8212S and 8212N only):
Flashing red = message awaits pickup.
Next to the
SPEAKER button:
On steady (with telephone on hook and busy) = speakerphone
mode active.
On steady (with telephone on hook and idle) = background
music turned on.
On steady (with telephone off hook and busy) = group
listen is active.
Next to the MUTE button:
On steady = called party cannot hear your conversation.
Next to the SHIFT button:
On steady = shift mode is activated to allow access to second level
autodial numbers programmed at DSS locations.
1.6 Understanding What the Rings Mean
•
Two short rings = intercom call.
•
Single longer ring = outside call.
•
One short ring burst = voice announce.
•
Three short ring bursts = ring back from a held call, callback from a
queued call.
You can vary the ringing tone of your telephone, choosing from one of
six different rings. This way, you can identify your ring even though you
may not be close to your telephone.
Additionally, so you won’t be disturbed when you’re busy on a call and
another call rings at your station, the ring volume is Subdued
automatically.
GCA70–248
Introducing The Telephone
Non-LCD Station User's Guide 1 – 11