Using your device in wet and dusty conditions – Sony XPERIA Z3v User Manual

Page 114

Advertising
background image

1

Before you start, make sure to back up any important data that is saved on the

internal memory of your device to a memory card or other non-internal memory.

2

From your Home screen, tap .

3

Find and tap

Settings > Backup & reset > Factory data reset.

4

Tap

Reset phone.

5

If required, draw your screen unlock pattern, or enter your screen unlock

password or PIN to continue.

6

To confirm, tap

Erase everything.

Using your device in wet and dusty conditions

To ensure the water resistance of your device, all covers, including the covers for the micro

USB port, the SIM card slot and the memory card slot, must be firmly closed.

Your smart device is waterproof and dust resistant in compliance with the Ingress

Protection (IP) ratings IP55 and IP58, as explained in the table below. To view more

specific IP information about your device, go to

www.sonymobile.com/global-en/legal/

testresults/ and click on the relevant device name.
These specific IP ratings mean that your device is dust resistant and is protected against

low pressure water stream as well as against the effects of immersion for 30 minutes in

fresh (non-saline) water up to 1.5 meters deep.
You can use your device:

in dusty environments, for example, on a windy beach.

when your fingers are wet.

in some extreme weather conditions, for example, when it’s snowing or raining.

in fresh (non-saline) water depths of 1.5 meters or less, for example, in a fresh water lake

or river.

in a chlorinated swimming pool.
Even if your device is resistant to dust and water, you should avoid exposing it

unnecessarily to environments with excessive dust, sand and mud or to moist

environments with extreme high or low temperatures. The waterproof ability of the micro

USB port, the SIM card slot, the memory card slot and the headset jack cannot be

guaranteed in all environments or conditions.
Never immerse your device in salt water or let the micro USB port or headset jack come

in contact with salt water. For example, if you’re at the beach, remember to keep your

device away from the sea water. Also, never expose the device to any liquid chemicals.

For example, if you’re washing dishes by hand using liquid detergent, avoid bringing your

device in contact with the detergent. After exposure to non-fresh water, rinse your device

using fresh water.
Normal wear and tear along with damage to your device can reduce its ability to resist

dust or moisture. After using the device in water, dry off the areas around all covers,

including the covers for the micro USB port, the SIM card slot and the memory card slot.
If the speaker or microphone get wet, their function may be impacted until the water has

completely dried. Please note that the drying time can be up to three hours depending

on the environment. During this time, you can, however, use other features in the device

that do not utilize the speaker or microphone. All compatible accessories, including

batteries, chargers, handsfree devices and micro USB cables, are not waterproof and

dust resistant on their own.
Your warranty does not cover damage or defects caused by abuse or improper use of

your device (including use in environments where the relevant IP rating limitations are

exceeded). If you have any further questions about the use of your products, refer to our

Customer support service for help.

IP (Ingress Protection) rating

Your device has an IP rating, which means it has undergone certified tests to measure its

resistance levels to both dust and water. The first digit in the two-digit IP rating indicates

the level of protection against solid objects, including dust. The second digit indicates

how resistant the device is to water.

114

This is an Internet version of this publication. © Print only for private use.

Advertising