G-Shock GT-001P-7T - Manual (Page 2)

1698/1918-2
ALARM MODE
When the Daily Alarm is turned on, the alarm sounds for 20
seconds at the preset time each day. Press any button to
stop the alarm after it starts to sound.
When the Hourly Time Signal is turned on, the watch beeps
every hour on the hour.
To set the alarm time
1. Hold down A while in the Alarm Mode until the hour digits
start to flash on the display. The hour digits flash because
they are
selected .
• This operation automatically turns on the Daily Alarm.
2. Press M to change the selection in the following
sequence.
A
M C
L
B
Hourly time signal
on indicator
Mode indicator
Alarm on indicator
Hour : Minutes
Hour Minutes
3. Press C to increase the selected digits. Holding down C increases the selection at
high speed.
• The format (12-hour and 24-hour) of the alarm time matches the format you select for
normal timekeeping.
• When setting the alarm time using the 12-hour format, take care to set the time correctly
as a.m. (no indicator) or p.m. (P indicator).
4. After you set the alarm time, press A to return to the Alarm Mode.
To turn the Daily Alarm and Hourly Time Signal on and off
Press B while in the Alarm Mode to change the status of the Daily Alarm and Hourly
Time Signal in the following sequence.
[Alarm On Indicator/Hourly Time Signal On Indicator]
To test the alarm
Hold down C while in the Alarm Mode to sound the alarm.
Both ON Both OFF Daily Alarm
Only Hourly Time
Signal Only