G-Shock DW-6695D-Y - Manual (Page 2)

B
E
2 1 3 4 5
A
C
D
Target time indicator
About the Target Time function
With the Target Time function, an alarm sounds for five seconds whenever the time being kept by
the stopwatch reaches a target time you have preset. To activate the Target Time function, simply
set a target time. The function is automatically deactivated whenever the target time is set to
0H00'00".
To set the Target Time
1. While the display is showing all zeros (0H00'00"00) in the
Stopwatch Mode, press A , and the hours digit of the target
time starts to flash. It flashes because it is selected .
• You can also press A in the above procedure after pressing
B to display the Auto-Start countdown time.
2. Press C to change the selection in the following sequence.
1209/1299-2
Hours Seconds Minutes