G-Shock DW-9600WC-9T - Manual (Page 2)

- 3 -
Note that you must input at least one character in the name area. You can skip input
of telephone number.
7. After you select the character you want, press to advance the cursor to the right.
Repeat steps 6 and 7 until you complete number input.
8. After inputting the data you want, press to store it into memory.
The name area shows only 5 characters, but automatically scrolls from right to left
to show all of the characters that make up the text.
To scroll through Telememo data
In the normal Telememo Mode (when the display is not flashing), press
to scroll
forward or to scroll backward through stored data.
The data item that is displayed when you exit the Telememo Mode will be the first
data to appear when you enter the Telememo Mode again.
To edit Telememo data
1. In the Telememo Mode, use
and to scroll through the data items and display
the one you want to edit.
2. Hold down until the flashing cursor appears on the display.
3. Use to move the cursor to the character you want to change.
4. Use or to select the character you want.
For details, see “To input Telememo data” (steps 3 through 4 for name input, or 6
through 7 for number).
5. After editing the data, press to store it.
To delete Telememo data
1. In the Telememo Mode, use
and to scroll through the data items and display
the one you want to delete.
2. Hold down until the flashing cursor appears on the display.
3. Press and at the same time to delete the data item.
At this time the cursor appears on the display ready for input.
4. Input data or press to return to the Telememo Mode.
To check remaining memory capacity
In the Telememo Mode, hold down
and to display remaining memory capacity.
ALARM MODE
You can set five independent alarms with the hour,
minutes, month and day. Use the Alarm Mode to
turn the alarm and the Hourly Time Signal on and
off.
When an alarm is turned on, an alarm tone sounds
for 20 seconds when the preset time is reached.
When the Hourly Time Signal is turned on, the
watch beeps every hour on the hour.
Alarm types
The types of alarm you get depends on the informa-
tion you set. Hour Minutes
Alarm No.
Mode indicator
Month – Day
AUTO DISPLAY FUNCTION
The Auto Display function of this watch continually changes the contents of the display.
Note that you cannot use any of the watch’s other functions while the Auto Display
function is operating.
To turn the Auto Display on
Hold down
for about two or three seconds in any mode until the watch beeps.
To turn the Auto Display off
Hold down
for about two or three seconds until the watch beeps. At this time the
watch is in the Timekeeping Mode.
Note
The Auto Display function cannot be performed while you are making settings (i.e.
while digits or other setting are flashing on the display.
Auto repeat on indicator
1. Hold down while in the Countdown Alarm
Mode until the hours digit flashes on the display.
2. Press to switch auto repeat on and off.
3. Press to return to the Countdown Alarm Mode.
When the end of the countdown is reached while
auto repeat is on, the alarm sounds, but the
countdown restarts from the beginning without
stopping. You can stop the countdown by press-
ing
and manually reset to the start time by
pressing .
2. Press to change the selection in the following sequence.
3. Press to increase the selected number. Holding down changes the number at
high speed.
To set the starting value of the countdown time to 24 hours, set to “0:00 00”.
4. After you set the countdown time, press to return to the normal Countdown Alarm
Mode (the flashing stops).
If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the normal Countdown Alarm Mode
automatically.
To use the countdown timer
1. Press
while in the Countdown Alarm Mode to start the countdown timer.
2. Press again to stop the countdown timer.
You can continue countdown timer operation by pressing .
3. Stop the timer and then press to reset the countdown time to its starting value.
When the end of the countdown is reached and auto repeat timing is off, the alarm
sounds for 10 seconds or until you stop the alarm by pressing any button. Countdown
timing stops, and the countdown time is automatically reset to its starting value after
the alarm stops.
To switch auto repeat timing on and off
Minutes Hours Seconds
The countdown timer can be set within a range of 1
second to 24 hours. When the countdown reaches
zero, an alarm sounds for 10 seconds or until you
press any button.
Note that you can also select auto repeat timing that
automatically restarts the countdown from the origi-
nal value you set whenever zero is reached. This
continues until you manually stop the countdown.
To set the countdown time
1. Hold down
while in the Countdown Alarm
Mode until the hours digit flashes on the display.
The hours digit flashes because it is
selected.
Mode indicator
Hours
Minutes Seconds
1/10 second
To record split times
1. Press
to start the stopwatch.
2. Press to display the timing up to that point. Stopwatch timing continues internally.
At this time, the display also shows “SPLIT” indicating that the split time is being
recorded.
3. Press to clear the split time and to continue time measurement on the display.
You can repeat step 2 and 3 as many times as you want.
4. Press to stop the time measurement.
5. Press to clear the stopwatch to all zeros.
To time first and second place finishes
1. Press
to start the stopwatch.
2. Press when the first finisher crosses the line, and record the time.
3. Press when the second finisher crosses the line.
4. Press to display the finishing time of the second finisher.
5. Press again to clear the stopwatch to all zeros.
COUNTDOWN ALARM MODE
STOPWATCH MODE
The Stopwatch Mode lets you measure elapsed
time, split times, and two finishes. The range of the
stopwatch is 23 hours, 59 minutes, 59.99 seconds.
To measure elapsed time
1. Press
to start the stopwatch.
2. Press to stop the stopwatch.
You can resume the measurement operation by
pressing
again.
3. Press to clear the stopwatch to all zeros.
Mode indicator
Hours
Minutes Seconds
1/100 second
Alarm on indicator Hourly Time Signal on indicator
4. Press to increase the number or to decrease it. Holding down either button
changes the current number at high speed.
To set an alarm that does not include a month (daily alarm, monthly alarm), set for
the month. Press
or until the mark appears (between 12 and 1) while the
month digits are flashing.
To set an alarm that does not include date (daily alarm, 1-month alarm), set
for the
day. Press or until the mark appears (between 31 and 1) while the day digits
are flashing.
The format (12-hour and 24-hour) of the alarm time matches the format you select
for normal timekeeping.
When setting the alarm time using the 12-hour format, take care to set the time
correctly as morning or afternoon.
5. After you set the alarm time, press to return to the Alarm Mode.
If you do not operate any button for a few minutes while a selection is flashing, the
flashing stops and the watch goes back to the Alarm Mode automatically.
To stop the alarm
Press any button to stop the alarm after it starts to sound.
To set the alarm time
1. Press
while in the Alarm Mode to select Alarm 1 through Alarm 5.
2. After you select an alarm, hold down until the hour digits start to flash on the
display. The hour digits flash because they are selected.
At this time the alarm is automatically switched on.
3. Press to change the selection in the following sequence.
Hourly Time Signal
Alarm 1 Alarm 2 Alarm 3 Alarm 4 Alarm 5
Hour Minutes Day Month
To set a Daily Alarm
Set the hour and minutes for the alarm time. Set for the month and
for the day
(see step 4 under “To set the alarm time”). This type of setting causes the alarm to
sound every day at the time you set.
To set a Date Alarm
Set the month, day, hour and minutes for the alarm time. This type of setting causes
the alarm to sound at the specific time, on the specific date you set.
To set a 1-Month Alarm
Set the month, hour and minutes for the alarm time. Set
for the day (see step
4 under “To set the alarm time”). This type of setting causes the alarm to sound every
day at the time you set, only during the month you set.
To set a Monthly Alarm
Set the day, hour and minutes for the alarm time. Set for the month (see step 4
under “To set the alarm time”). This type of setting causes the alarm to sound every
month at the time you set, on the day you set.
To switch an alarm and Hourly Time Signal on and off
1. In the Alarm Mode, press
to select an alarm or the Hourly Time Signal.
2. When the alarm or Hourly Time Signal you want to is selected, press to switch it
on and off.
If any alarm is on, the Alarm on indicator is shown on the display when you change
to another mode.
To test the alarm
Hold down
while in the Alarm Mode to sound the alarm.