G-Shock GW-4000 - Manual (Page 5)

Operation Guide 5087
E-49
To specify standard time or daylight saving time (DST) for a city

* 6

Hold down
A for two
seconds
In the World Time Mode, use 1. D to select the city code
whose setting you want to change.
Wait until the x b Left Dial Hands complete their move
to the time in the currently selected World Time
City. You will not be able to perform step 2 of this
procedure until the hands stop moving.
Hold down 2. A for about two seconds until the watch
beeps. This will cause the n Right Dial Hand to toggle
between DST (daylight saving time) and STD (standard
time).
Note that you cannot switch between x STD (standard
time)/DST (daylight saving time) while UTC is
selected as the World Time City.
Note that the
x STD (standard time)/DST (daylight
saving time) setting affects only the currently
selected city code. Other city codes are not affected.
E-48
To view the time in another time zone
Use 1. C to move the n Right Dial Hand to STD or DST.
The x x Second Hand will move to the city code of the currently selected World
Time City.
Use 2. D to move the x Second Hand to the city code you want to select as the
World Time City.
The x b Left Dial Hands will move to the current time in the time zone of the
current city code. At this time, the z Hour Hand and c Minute Hand will
continue to indicate the current time in the Home City.
For full information on city codes, see the “City Code Table” at the back of this
x
manual.
If you think that the time indicated for the selected time zone is not correct, it
x
probably means that there is something wrong with your Home City settings. Use
the procedure under “To confi gure Home City settings” (page E-33) to correct
the Home City settings.
E-47
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current time in one of 29 time zones
around the globe. The city that is currently selected in the World Time Mode is called
the “World Time City”.
Hand Functions
x Second Hand:
Indicates the currently selected World Time City.
b Left Dial Hands:
Indicate the current time in the selected World Time
City in 24-hour format.
n Right Dial Hand:
Indicates the current STD (standard time) or DST
(daylight saving time) setting of the currently selected
time zone.

@
* 6
E-46
Note
The Stopwatch Mode can indicate elapsed time up to 23 minutes, 59.99 seconds. x
x D button operation (split, reset) is disabled while hands are moving at high speed
following a reset operation and when transitioning from a split time back to normal
elapsed timekeeping.
Once started, stopwatch timing continues until you press
x B to stop it, even if you
exit the Stopwatch Mode to another mode and even if timing reaches the stopwatch
limit defi ned above.
The
x x Second Hand indicates the 1/10-second count for the fi rst 30 seconds of a
stopwatch elapsed time operation. After that, the hand stops at 12 o’clock.
1/10-second timing continues internally after the fi rst 30 seconds, and the
x Second Hand will jump to the current value whenever B (Stop) or D (Split) is
pressed.
Though the
x n Right Dial Hand is stopped while an elapsed time measurement
operation is in progress, the watch keeps track of the 1/100-second count
internally. The
n Right Dial Hand will jump to the current 1/100-second reading
whenever you stop the stopwatch or perform a split time operation (page E-45).
E-45
To perform elapsed time measurement
Use 1. C to move the n Right Dial Hand to 0.
Now you can perform either of following stopwatch operations. 2.
To perform an elapsed time operation
B B B B D
Start Stop (Restart) (Stop) Reset
To pause at a split time
B D
Normal stopwatch hand movement will
resume automatically after fi ve seconds.
B D
Start Split Stop Reset
E-44
Using the Stopwatch
The stopwatch measures elapsed time and split times.
Hand Functions
x Second Hand: Indicates the stopwatch 1/10-second
count.
b Left Dial Hands: Indicate the stopwatch minutes and
seconds.
n Right Dial Hand: Indicates the stopwatch 1/100-second
count. 
@
* 6
E-43
Use 9. D (+) and B (–) to change the m Day setting.
If you want to change the time setting at this time, x
press C and then perform the procedure starting
from step 3 under “To change the current time setting
manually” (page E-37).
After the settings are the way you want, press 10. A to
return to the Timekeeping Mode.
This will cause the x x Second Hand to move
automatically to 12 o’clock and resume movement
from there.
The day of the week indicated by the
x n Right Dial
Hand changes automatically in accordance with the
date (year, month, and day).
Note
The watch’s built-in full automatic calendar makes allowances for different month x
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s rechargeable battery replaced or after
power drops to Level 3.

6
@
5
E-42
Setting the month
@
Dec
Jan
Feb
Mar
Apr
Jun
May
Nov
Jul
Oct
Sep
Aug
Use 7. D to move the x Second Hand to the
month setting you want.
After the month setting is the way you want, 8.
press C.
The watch will beep and change to the day x
setting mode.
E-41
Setting the year (ones digit)
@
0 1
2
3
4
6 5 7
9
8
After the tens digit of the year setting is the way 4.
you want, press C.
The watch will beep and change to the ones x
digit of the year setting mode.
Use 5. D to move the x Second Hand to the ones
digit of the year setting you want.
Each press of x D will move the x Second Hand
and change the ones digit of the year setting.
After the year setting is the way you want, press 6.
C.
The watch will beep and change to the month x
setting mode.
E-40
To change the current date setting manually
@
00
50
10
40
30 90
60
80
70
Setting the year (tens digit)
20
In the Timekeeping Mode, keep 1. A depressed
(for about fi ve seconds) as the x Second Hand
goes through the following sequence.
Moves to x Y (or YES for some models) or
N (NO) to indicate the last signal reception
result, then to R (READY), and then to the city
code of the currently selected Home City.
Press 2. C twice.
The watch will beep and change to the year x
setting mode.
The year can be set in the range of 2000 to
x
2099.
Use 3. D to change the tens digit of the year
setting.
Each press of x D will move the x Second Hand
and change the tens digit of the year setting.